STRICH UHF Wireless Microphone System for Dynamic and Condenser Mics

🔔The M2 audio transmitter and receiver can be used to connect dynamic microphones when the phantom power switch is turned off. However, the M2 cannot be used with high capacitance microphones, such as the Behringer BA 19A, as they require phantom power. When the phantom power switch is turned on, the M2 can be used to connect a condenser mic.

The normal working hours of the M2 are 6-8 hours, but the actual usage time may vary due to the power consumption of the microphones of each brand. It is recommended that you test the actual available time before the official performance to avoid affecting your normal work.

The M2 wireless mic system adopts ultra-high frequency UHF transmission technology, which provides a strong anti-interference ability and an ultra-high frequency response range. This ensures that your voice is transmitted stably and clearly to the audio receiving device.

The M2 wireless XLR microphone transmitter-receiver comes with an XLR to 1/4 adapter, allowing it to be widely used in different usage scenarios, such as connecting to microphones, speakers, mixers, and PA systems. The metal XLR interface ensures a more firm and stable connection.

The M2 wireless mic system supports 16 sets in the same place simultaneously, making it perfect for venues, weddings, and mobile DJs. It works with any dynamic/harmonic microphone, audio mixer, or PA system, and provides stable and reliable wireless transmission with less than 6 ms latency(normal).

The UHF band is optimal for microphone wireless, providing a solid RF connection over a 164 - 262 feet range (normal) and uncompressed wireless signal transmission with low noise and latency. The high-resolution 24-bit / 48kbps audio and broad 40Hz - 20KHz frequency response ensure clear, detailed audio at any volume. However, it's important to note that a low battery level will affect the transmission distance.

If you have any questions, you can click on the "YOUR ORDER" options and then click the "contact seller" button.

product information: